Sundstrand Sauer Danfoss Hydro Transmission EDC Dual Track Control System

Sundstrand Sauer Danfoss Hydro Transmission EDC Dual Track Control System

Sundstrand Sauer Danfoss Hydro Transmission EDC Dual Track Control System

Comments Off on Sundstrand Sauer Danfoss Hydro Transmission EDC Dual Track Control System

Sundstrand Sauer Danfoss Hydro Transmission EDC Dual Track Control System

Dual track control systems are used because of the high energy efficient stall control they have, spin steer and the many speed controls with ease of handling.
Using these EDC controls can sense engine throttle position, speed and directional commands, engine speed and hydraulic motor track speeds.
The electronic controller will control the EDC to make sure the engine and track speeds are at constant values that are in line with the operator output. The straight line operation will be maintained with no steer inputs. Turning radius is keep at the same level of operation that is kept separate of the vehicles speed or anti stall operation. And any engine lugging that is below the governor setting is limited to any throttle setting.

If you need more info on this topic, please call us at 800-361-0068
sales@hydrostatic-transmission.com

About the author:

Back to Top