This CFD Flow Divider is made for power steering and some other applications that require two detached hydraulic power circuits need to be run from a single pump. And the oil is given to both separate flows. One runs on just a constant even flow and the other needs to use a greater oil flow. This also can be reversed using a controlled flow work port, but it will not be under any kind of pressure. Your controlled flow is done by using a metering spool that has to be installed.

Here are some features of this divider:

Has an integral relief valve using a constant flow circuit, can be altered by using shims. You also can get this without the relief valve.

Cross drilled shifting spool that gives exact metering.

It is available in ten different metering spools.

The metering spools are transposable.

Here is the specs on this unit:

Input capacity………………………………………………….20 gpm Maximum Operating Pressure………………………3000 PSI Constant Flow Relief Valve……………………………up to 2500 psi pressure setting

If you need further info on this flow divider or we can assist in ordering you one, call us at 800-361-0068

sales@hydrostatic-transmission.com