P20 Single & Multiple Gear Hydraulic Pumps/Motors

P20 Single & Multiple Gear Hydraulic Pumps/Motors

P20 Single & Multiple Gear Hydraulic Pumps/Motors

Comments Off on P20 Single & Multiple Gear Hydraulic Pumps/Motors

P20 Single & Multiple Gear Hydraulic Pumps/Motors

 

These small gear pumps pack a punch. They have a port end cover that is light weight, 1/2″ gear that is 6″ from the mounting flange. Has flows that can go up to 2.96 cir at 3000 PSI output to 3.94 cir that go up to 2500 PSI. They offer different mounting flanges, drive shafts and pressure thrust plates.

You can make these pumps in a tandem application to produce more flow. As you can see by the charts and diagrams it will go into detail about the displacement of operating pressure by the gear width.  It has the performance of the pump by its GPM and give you the torque output.

And for different mounting flanges of a SAE A,B 2 bolt and 4 bolt systems. Will tell about the drive shafts whether they are splined, keyed or tapered. It will give measurements of the pumps.

And it will breakdown a parts list as well for the smaller parts.

If you need further assistance with this or any pump or motor, give us a call at

800-361-0068

sales@hydrostatic-transmission.com

 

 

 

About the author:

Back to Top