Series 350 Hydraulic Oil Single/Multiple Pump & Motors

The housings on these units are made of cast iron for strength. The drive gears and shafts are made from one piece to give the greatest strength. Gear teeth and the journals are carburized.  And the thrust plates are pressure loaded.

These are some mountings that go on the series 350:

standard SAE B 2- and 4 bolt

SAE C 2- and 4 bolt

The charts on larger picture show the pump and motor performance.

You can get either rotations on these units CCW and CW, motors are bi directional.

And it uses direct drives.

As an option you can get a motor that has a built in crossover relief valves.

Some of the test that were run on these units used a reservoir that had temps at 120 F

You can look at these charts for pressure rates, output or input.

Any questions, call us at 800-361-0068

sales@hydrostatic-transmission.com