Compact Hydraulic Series 108 Power Units

Compact Hydraulic Series 108 Power Units

Compact Hydraulic Series 108 Power Units

Comments Off on Compact Hydraulic Series 108 Power Units

Compact Hydraulic Series 108 Power Units

These small compact units are very powerful, they will tilt and trim on an inboard or outboard motor/drive for hydraulic lifts.

They have a pressure up to 3500 PSI, flows to 3/4 gpm, 12 or 24 vdc or ac, weigh about 8.5 lbs and have 2 different pump sizes.

 

The bi directional pump are driven by reversible motors and used to power double acting cylinder for both ways. The locking checks that hold the load in either direction are usually standard.

 

On the uni directional pump will only go in one direction and do not go in reverse.  They are used to power single acting cylinders and they have a load holding check valve.

And these are cleared  for SAE J1171 marine specs as far as the codes go.

 

So if you need more info on these types of motors, give us a call at 800-361-0068

or email us at info@hydrostatic-transmission.com

 

 

 

About the author:

Back to Top