WM30/31/50/51 Two Speed Motors

WM30/31/50/51 Two Speed Motors

WM30/31/50/51 Two Speed Motors

Comments Off on WM30/31/50/51 Two Speed Motors

WM30/31/50/51 Two Speed Motors

These winch motors can handle pressure to 3000 PSI. They are built to have two speed valving that is shifted out quickly to low speed, high torque or high speed and low torque.

When it is in winch operation, you will need to counterbalance valve in the circuit and may need to be put on the bearing carrier. If you need counter balancing in both directions, you will be able to use a two speed motor.

There are other options such as shafts, mounts, porting/gear sizes can be special ordered on these units.

If you need further info on these motors, call us at 800-361-0068

sales@hydrostatic-transmission.com

 

 

About the author:

Back to Top