Packing Bearings with Lubrication
Packing Bearings with Lubrication
March 24, 2016 Comments Off on Packing Bearings with LubricationAt our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic Parts
Today we will discuss;
Packing Bearings with Lubrication
Before you put your new bearings on your unit, they need to be packed with right amount of lubricant, that is manufactured recommended. The grease needs to be packed into the spaces around the balls or rollers. There should be enough grease to fill the bearing from 1/3 to 1/2 full. Try not to use any more than that amount, it causes leakage, churning and excessive heating.
Most bearings installed in a pump or motor frames come with filling plugs and drain plugs. To grease this particular type of bearing, fill the bearing until fresh grease comes out of the drain hole and then replace the drain plug. When it is properly filled, the bearing is flushed free of old grease and only fresh grease remains.
Need more help on this topic or would like to discuss another topic, let us know.
Or you can call us at 800-361-0068
sales@hydrostatic-transmission.com
hydrostaticpumprepair.com