These units are long lasting thrust and roller bearing that is used on side loads. Roller vanes that will lower resistance and internal seeping of fluids and preserve the quality. It has a orbiting system that helps with reducing wear and tear. It is made to produce more torque with lighter weight. Has a shaft seal that gets rid of case drain, check valves and all the extra plumbing. The end thrust volume can handle 1000 lbs in either way you go. Made to resist contamination. The manifold performs at the optimum level. The horse power output is 36. Made better so it will go with less drive spline wear. Does really good in low speeds. These are the TF models.

The TG/TH/TL gives the same performance as the TF with a little extra. It has horsepower output of 49.

Call us for more information on this unit. 800-361-0068

sales@htsrepair.com