This type of sprocket use a drive piston, chain and sprocket to make the shaft turn around. There is a standard piston that operates as a driver that pulls a chain and a smaller piston that gives a seal that want let fluid leakage that goes past a return side of a very long chain. This rotary actuator gives off torque outpost to twenty three thousand pound inches. The shaft rotations are eighteen hundred degrees.

It is very important to get the right rotary actuator that works for the job at hand, like torque, speed and application modes. Also, you will need to know if it is a single or double acting, closed positioning cushioned and how often or cycle rate will need to be determined.

For more information on this subject, call us at 800-361-0068

sales@hydrostatic-transmission.com