Denison Barrel and Auxiliary Shaft
Denison Barrel and Auxiliary ShaftAugust 14, 2017 Comments Off on Denison Barrel and Auxiliary Shaft
Barrel and Auxiliary Shaft Assembly
1. Fit in the barrel (1) with the bores facing
down on a clean area.
Place the hold down spring (3) into barrel counter-
Put in spring retainer (5) into counter bore and
seat next to spring.
Place the retaining ring (6) into barrel counter-
bore groove. Align retaining ring so that it is fully
seated in groove.
Fix the barrel stop (4) over auxiliary drive
shaft (2). Rotate barrel on side and put the auxiliary
drive shaft and barrel stop into the barrel
spline and hold down spring.
Barrel & sleeve assy Pi 1 P only
Barrel & sleeve assy PHP only
Auxiliary drive shaft
If more information is needed for this topic, please call us at