Hydraulic Oil Flow Dividers for Pumps & Motors

Hydraulic Oil Flow Dividers for Pumps & Motors

Hydraulic Oil Flow Dividers for Pumps & Motors

Comments Off on Hydraulic Oil Flow Dividers for Pumps & Motors

Hydraulic Oil Flow Dividers for Pumps & Motors

Flow dividers are used to allocate the pump flow corresponding to the specifications of each system.
Some examples are listed below.

Concrete Pumps
Their circuit pump give sporadic high pressure and speed contrast. This two section flow divider works in pressure build up and speed control mode. If it is a four section divider splits up how the flow goes to machine services.

Drill Rig
The flow circuit in this process is done with a variable speed drill operation. Two main flows are going to the drill motor, the third supplies the auxiliary services and the fourth goes to several services like drill rod screwing and unscrewing.

Mining Machine
The flow circuit use the mid inlet valves on the machine let maximum deployment of power and getting rid of the need for the gearbox directed, multiple pump unit.

If further explanation of this is needed or if you would like to leave a comment, contact us at
800-361-0068
sales@hydrostatic-transmission.com

About the author:

Back to Top