Sundstrand Sauer Danfoss Hydraulic Open Circuit Controls

Sundstrand Sauer Danfoss Hydraulic Open Circuit Controls

Sundstrand Sauer Danfoss Hydraulic Open Circuit Controls

Comments Off on Sundstrand Sauer Danfoss Hydraulic Open Circuit Controls

SPEED SENSING CONTROL
Sundstrand Sauer Hydrostatic Transmissions offers a Speed Sensing Control, which prevents prime mover excess by de-stroking the pump in reaction to a droop in prime mover speed. The control will routinely adjust the pump displacement in reply to a change in system load pressure.
Therefore, matching pump input torque requirement to the torque to be had from the prime mover. Control set speed is adjustable within speed range. The Open Circuit Control contains a basic Pressure Compensator and an optional Flow Compensator is available.

TORQUE LIMITING CONTROL
Sundstrand Sauer Hydrostatic Transmissions Torque Limiting Control confines pump input torque to a constant value. The control responds to a change in system pressure and mechanically regulates the pump displacement to preserve a factory set even torque value. Torque Limiting
Control can also be used in a torque summing system, which allows two pumps to operate autonomously while limiting the sum of their own torques to a constant value. Each pump knows the system pressure of its partnered pump with no mechanical connections. The control contains an essential Pressure Compensator and an optional Flow Compensator is available.

List of features of the Torque Limiting Control offers:
• Prevents prime mover halt when hydraulic horsepower exceeds prime mover potential
• Torque setting is for all intents and purposes unaffected by prime mover speed
• Offering a broad range of torque values
• Best possible engine loading
• Prevents engine lugging
• Implments use of pumps with horsepower levels totaling more than prime mover power

MAX.-
TORQUE 0
80% 100% ENGINE SPEED

pump1
pump2

Visit us at our

EBay store: Hydrostatic Transmission Service

And Check Out Our Great Deals.

Hydrostatic Transmission Service, LLC offers hydraulic pump, hydraulic motor, hydraulic valve repair, Gear pump repair, piston pump repair, vain pump repair, and all pump repair

For the following Equipment

Nachi, Sundstrand, Eaton, Vickers, Racine, Commercial, Cessna ,Poclain, Hitachi, Kawasaki, Dynapower, Oil-Gear,Shibaura ,Volvo, Denison, komatsu, Hydash ,Rexroth ,Uchida, Breuninghaus Yamaha, Barnes ,Mitisibushi, Sumitimino,

When you need All Hydraulic Pump Repair, call us first!

If We can not help you we will put you in touch with someone who can.

All Pump Repair

Hydraulic pump, Hydraulic motor, Hydraulic valve, piston pump Repair Center.

We offer hydraulic pump repair hydrostatic drive repair hydraulic transmission repair hydraulic motor repair hydraulic equipment repair for the following

Sundstrand, Eaton, Rexroth, Kawasaki, and others.

CALL US FOR YOUR REPAIR ON DIFFICULT TO LOCATE VICKERS HYDRAULIC TRANSMISSION REPAIR.

MITSUBISHI, KAWASAKI, DAEWOO ,DYNAPOWER, LINDE, REXROTH, UCHIDA, YAMAHA, HITACHI, KOMATSU, LIEBHERR, POCLAIN, VOLVO, VICKERS, CESSNA, HYDROMATIK AND SUNDSTRAND AND EATON CLOSED LOOP AND OPEN LOOP HYDRAULIC DRIVE PUMPS AND MOTORS.

(800) 361-0068

404 Air Park Rd
Tupelo, MS 38801
Phone: (662) 680-8899
Toll Free: (800) 361-0068

Contact US

Email: info@hydrostatic-transmission.com

About the author:

Back to Top