Hydraulic Remote Controllers Codes & Technical Data

Hydraulic Remote Controllers Codes & Technical Data

Hydraulic Remote Controllers Codes & Technical Data

No Comments on Hydraulic Remote Controllers Codes & Technical Data

Maximum input Pressure 650 psi 44.8 bar Maximum Return Line Pressure 50 psi 3.5 bar Maximum Control Flow 5gpm 19lpm Viscosity Flange 80-1800 SUS 15-380 cSt Oil Temperature Flange -4F to 150F -20C to 70C Weight Dual Function 4.0 lbs 1.8 kg Single Function 5.0 lbs 2.3 kg Foot Pedal 8.0 lbs 3.6 kg Filtration Required Min. 10 Microns Absolute Handle Effort 8-11 lbs 3.6-5 kg

Pump gives port to pilot port – handle full stroke Or pump port to tank port – handle neutral

If you do not adhere to the 10 micron meter filtration instructions that are mandated it can cause valve plungers to bind or stick to the power position. Plungers that bind will not go back to neutral when you use the handle.

If you need further help with the codes or understanding the data, please call us at 800-361-0068.

And you can email us at sales@hydrostatic-transmission.com

About the author:

Leave a comment

Back to Top