Eaton Series 76 Hydraulic Remote Pump Control

Eaton Series 76 Hydraulic Remote Pump Control

Eaton Series 76 Hydraulic Remote Pump Control

Comments Off on Eaton Series 76 Hydraulic Remote Pump Control

Sundstrand Sauer Danfoss Series 76 Hydraulic Remote Pump Control

Port 1

The pilot pressure to port 1 allows flow from pump port B with an input shaft that rotates counter clockwise and flows from pump port A with an input shaft that goes clockwise.

 

Port 2

On port 2 the pilot pressure allows the flow from pump port A that has an input shaft that rotates counter clockwise and flows from pump port B that has input shaft that goes clockwise.

Note : At the top left corner of this picture, if you wish it to be neutral adjustment, make sure to remove the plug.

 

If you have any other questions about this, call us at 800-361-0068

sales@hydrostatic-transmission.com

About the author:

Back to Top