Sundstrand Sauer Danfoss Series 20 Part 2 Transmission Start Up
February 26, 2016
At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic Parts
Today we will discuss:
Transmission Start Up Part 2
Gradually increase speed to about 1000RPM; charge pressure to 600 PSI gauge ought to be 190-210 PSI above pump case pressure.
Cut off prime mover and connect linkage to the displacement control valve handle. If you have the motor shaft connected to teh drive mechanism, should consider safety precautions.
Contact us anytime you have questions or want to leave a comment
call us at 800-361-0068